Bell Turbo Hub Guia do Utilizador descarregar pdf (Página 38)

2B2BConfiguration and Management

PIN:

The PIN (Personal Identification Number) code, which

is used for SIM authentication.

Auto APN

If enabled, the APN (Access Point Name), user

name, password and authentication protocol are

automatically configured based on information on the

SIM card. If this fails, an alarm is raised (displayed in

the ALARMS section on the Overview page as “No

Auto APN was found”) and the needed parameters

have to be provided manually in the corresponding

fields (see below).

APN:

Used if manual configuration of APN is needed (see

“Auto APN” above). The APN, which is a reference to

the 3G/2G Internet access point on the service

provider’s network. The APN usually has the format

<name.service_provider.country>.

Used if manual configuration of APN user name is

needed (see “Auto APN” above).

User name:

Password:

Used if manual configuration of APN password is

needed (see “Auto APN” above).

Authentication

Protocol:

Used if manual configuration of authentication

protocol (PAP or CHAP) is needed (see “Auto APN”

above).

If authentication is required because of a reset to factory default

configuration, fill in the appropriate fields and click Apply to save the

settings.

Note: Only enter details you have received from your service provider

and leave other fields empty.

3.4.3.1 Unblock SIM Card

If three attempts have been made with an incorrect PIN code, the SIM card

is blocked and the Unblock SIM button is displayed besides the “PIN” field.

Figure 27 - Unblock SIM button

32 1/1551-CRH 102 168 Uen Rev B 2009-06-10

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 97 98

Sem comentários

Bell Turbo Hub Guia do Utilizador Página 38